A new portable half-frame bulk bag discharger with manual bag dump station and integral flexible screw conveyor is designed to transfer material discharged from bulk bags and/or manually dumped from hand-held sacks into downstream process equipment or storage vessels, dust free.   

Mounted on a mobile frame with locking castors for in-plant mobility, the system minimises weight and maintains a low centre of gravity by eliminating upper frame components, relying on the user’s forklift or plant hoist to suspend bulk bags above the discharger during unloading.

Flexicon’s bulk bag discharger features its trademark Tele-Tube telescoping tube, which raises a Spout-Lock clamp ring pneumatically for connection to the bag spout, and then descends by gravity, maintaining constant downward tension on the spout as the bag empties and elongates, promoting flow.

At timed intervals, Flow-Flexer bag activators raise and lower opposite bottom edges of the bag to loosen agglomerates and direct material through the bag spout. As the bag lightens, the stroke of the bag activators increases, ultimately forming a steep "V" shape to promote total discharge.

For manual dumping, the operator raises a hinged bag-dump support shelf and a hinged hopper door, and pours material through a coarse screen into the hopper. When the hopper lid is open for manual dumping, an integral Bag-Vac dust collector draws air and dust away from the operator. When the hopper lid is closed, the dust collector creates negative pressure within the dust-tight system to contain dust during discharge, and to collapse empty bags prior to retying and disconnection, eliminating dust emitted during manual flattening of empty bags.

The flexible screw conveyor transports both free- and non-free-flowing bulk materials including products that pack, cake, smear, seize or fluidise, with no separation of blends. The conveyor support mast cantilevers from the frame, and runs parallel to the conveyor tube, allowing the castor-mounted system to manoeuvre in restricted areas.

Ready to operate, the self-contained system is designed to serve multiple functions throughout a plant. After use it can be rolled to a cleaning station where a lower clean-out cap on the conveyor tube can be removed to flush the smooth interior surfaces with steam, water or cleaning solutions, or to fully remove the flexible screw for cleaning and inspection.

The system is offered in an all-stainless construction, with stainless material contact surfaces, or in a carbon steel option with durable industrial coatings.