Robots boosted production reducing transport time by 40% meeting FDA regulations

31st August 2021

     

Font size: - +

Established in 1937, Madrid-based company, Normon, has been manufacturing high-quality medicines for over 80 years, serving customers in the pharmaceutical and healthcare sectors throughout Europe and in the US. The company prides itself in its advanced technology and innovation, and its ability to produce affordable medicines in a sustainable way.

A solution for clean room environments

Normon was using automated guide vehicles (AVGs) within the production process. However, following a change in the environment in which the robots needed to be deployed, the company discovered that the AGVs were too large to be used in certain clean rooms. Robots used in this environment must meet stringent requirements to prevent them for acting as a source of contamination. A different type of robot would be required for the clean room application, as without robots, highly trained and qualified operators would have to transport the products within the clean rooms, instead of focusing on their own tasks.

Normon’s Head Engineer, Jose María Urdillo, comments: “We were looking at the different solutions in the market and particularly interested in autonomous mobile robots (AMRs), but these were not able to meet our criteria.  However, we then came across an impressive AMR produced by OMRON, which was suitable for work in clean rooms.

The OMRON LD mobile robot could be personalised to meet Normon’s specific needs and was very easy to install in the plant. The whole implementation process took just three days and was carried out by Mipelsa, an integrator that specialises in the implementation and maintenance of electronic products, including those involved in industrial automation. OMRON worked closely with the system integrator throughout the whole process.

The installation and start up in the Normon factory, was extremely fast, previously tested in the Mipelsa laboratory after building a similar work area, and it was here where a fine tuning to fulfil all the performance and safety requirements was done, highlighting that was very easy from the Normon point of view to make the commissioning in just one week working in production mode.

Normon was pleased with the help and advice provided by both OMRON and Mipelsa, including a redesign of a tray holder to include a slight bend in one of the tubes holding the structure, which resulted in a more robust construction, this being the most relevant in the application to reduce the presence of humans in an “A class” working area as specified by the FDA in their requirements. No modifications in the environment were needed when integrating the robots, which were ready for trials within a week.

Improved productivity

OMRON’s  Project Manager, Miguel Ángel Esteban, says: “Since the first implementations of OMRON mobile robots in 2018 and 2019, Normon now operates one of the first and largest mobile robot fleets in Europe, with 18 mobile robots in service. According to Normon, the project was a huge success when the robots have demonstratively boosted production after one month in operation.”

This proved to be the case- productivity improved significantly, as 111,000 vials could be transported in 40% less time than before, reducing the length of stay in the plant’s “A class” area. This means that the production process that previously took one and a half shifts can now be completed in less than a shift. The FDA regulations require no people to be present in an “A class” area, and this has been made possible thanks to OMRON’s mobile robots.

Following the introduction of the robots, employees can perform more specialised tasks and functions within the Clean Room, adding more value to their work and ultimately the company. What is noteworthy about this specific project is that not one employee has been re-deployed or made redundant by the introduction of the Cobots in the “A Class” area of Normon.  

As the OMRON robots have exceeded Normon’s expectations, additional future implementations are being planned. Miguel Ángel Esteban concludes: “Intralogistics solutions such as this are key to meeting the needs of our pharmaceutical customers, especially in clean room environments. With the newest additions to our mobile robot fleet, including mobile robots capable of transporting heavy loads, we can offer a solution to a wide range of applications.”

Edited by Creamer Media Reporter

Comments

The content you are trying to access is only available to subscribers.

If you are already a subscriber, you can Login Here.

If you are not a subscriber, you can subscribe now, by selecting one of the below options.

For more information or assistance, please contact us at subscriptions@creamermedia.co.za.

Option 1 (equivalent of R125 a month):

Receive a weekly copy of Creamer Media's Engineering News & Mining Weekly magazine
(print copy for those in South Africa and e-magazine for those outside of South Africa)
Receive daily email newsletters
Access to full search results
Access archive of magazine back copies
Access to Projects in Progress
Access to ONE Research Report of your choice in PDF format

Option 2 (equivalent of R375 a month):

All benefits from Option 1
PLUS
Access to Creamer Media's Research Channel Africa for ALL Research Reports, in PDF format, on various industrial and mining sectors including Electricity; Water; Energy Transition; Hydrogen; Roads, Rail and Ports; Coal; Gold; Platinum; Battery Metals; etc.

Already a subscriber?

Forgotten your password?

MAGAZINE & ONLINE

SUBSCRIBE

RESEARCH CHANNEL AFRICA

SUBSCRIBE

CORPORATE PACKAGES

CLICK FOR A QUOTATION