Mission again accomplished by SA in supporting US science satellite launch

17th July 2014 By: Keith Campbell - Creamer Media Senior Deputy Editor

Mission again accomplished by SA in supporting US science satellite launch

The OCO-2 spacecraft folded up in a hangar
Photo by: NASA

The Space Operations division of the South African National Space Agency (Sansa) on Thursday revealed that it had supported the successful launch of the US National Aeronautics and Space Administration’s Orbiting Carbon Observatory-2 (OCO-2) satellite on July 2. The spacecraft was launched on a Delta II rocket from Vandenberg Air Force Base in California. The support was provided by the tracking, telemetry and command ground station at Space Operations’ Hartebeesthoek facility (known as HBK for short), west of Pretoria.

“For the station to qualify or be eligible to conduct any support, we conduct a number of tests including the establishment of a Satcom [satellite communications] uplink to send simulator telemetry and video imagery to Vandenberg mission control,” explained Sansa Space Operations international business manager Tiaan Strydom. “HBK is the only station in the Southern Hemisphere with this type of capability and there is no room for error.”

Sansa Space Operations was actually acting on behalf of the United Launch Alliance (ULA), the US company responsible for launching the satellite. ULA is a 50:50 joint venture between Boeing and Lockheed Martin and produces the famed Atlas and Delta rockets which together have launched some 1 300 space missions over more than 50 years.

The Delta II rocket carrying OCO-2 was launched from Vandenberg at 11:56 Central African Time (CAT) and its signal was acquired by HBK at 12:45 CAT. “Our coverage included the second stage burn-2 and live video footage of the spacecraft separation,” reported Sansa Space Operations operations manager Yunus Bhayat. (Burn-2 means the second burn, or firing, of, in this case, the second stage’s rocket motor.)

The second stage burn-2 involved the ignition of the launch vehicle’s second engine, which pushed OCO-2 into its insertion orbit. A short time later, a video camera located on a strut on the second stage, and positioned to look forward, was switched on to observe the separation of the satellite from the Delta II second stage. The total time taken by the second stage burn-2 and the streaming of the live video of the separation was 11 minutes.

“Sansa’s exclusive location and technical expertise put us in a position to monitor these key events, as they take place over the African airspace,” highlighted Bhayat. “Telemetry received from the craft included high quality video footage which was sent to ULA. We employ multiple redundancies in the form of antennas and sub-systems to minimise the risk of failure.”

“The events that take place after launch are crucial to the housekeeping of satellites and to make sure that they are on track in terms of their specific flight trajectories and functionalities in space,” pointed out Strydom. “If these events are not monitored, they could be catastrophic.”

OCO-2 is designed to provide precise measurements of carbon dioxide in the atmosphere. Its payload is effectively a single experiment, with three high resolution grating spectrometers to gather the required data. This data will then be compared with equivalent data gathered by ground stations and aircraft. The spacecraft has a planned operational life of two years.