https://www.engineeringnews.co.za

Blast Furnace Gas Compression: Air Products blazes an innovation trail to cost and energy savings for ArcelorMittal South Africa

2nd July 2014

  

Font size: - +

This article has been supplied as a media statement and is not written by Creamer Media. It may be available only for a limited time on this website.

Air Products South Africa  (0.07 MB)

Air Products South Africa has once again proven its market leadership when it comes to finding innovative solutions to industrial challenges.  The company has recently designed and implemented a new way of mixing gases using thermo-compressor technology, and as part of ongoing trials has successfully commissioned the first station of its kind at ArcelorMittal’s Newcastle operations.

Ian Gorin, Process Engineering Manager at Air Products South Africa, explains:
“The problem was that the mill required a higher pressure gas than what was available from the blast furnace gas.  Instead of the traditional method of using a booster compressor powered by electricity, we designed a gas thermo-compressor.  This system controls and modulates the gas mix ratio to give exact calorific value as required by the customer. “To compress the blast furnace gas by 25 kPa (according to the design flow rate) would have required a blower consuming 145 kW of power,” Gorin continues.  “The major benefit of the gas thermo-compressor is that it utilises zero electrical energy which obviously translates into significant cost savings for the customer.” The complete gas thermo-compressor station was designed by the Air Products South Africa projects team at the company’s main facility in Vanderbijlpark.  The team also jointly managed the installation with Air Products’ Newcastle operations team.

“The need for the station arose from an energy deficit at ArcelorMittal,” says Gorin.  “The steel mill was importing a high calorific value methane-rich gas, while the blast furnace was flaring gas.  The gas is combustible and usable if mixed in the correct proportion with methane-rich gas, to create a mixed gas with the correct calorific value.” The system works on the principle of using the higher pressure from the methane-rich gas as the motive gas to induce a flow of low pressure blast furnace gas – thereby creating a mixed gas at an intermediate pressure which is higher than the blast furnace gas. By modulating the various pressures, the thermo-compressor produces the mixed gas at a set flow rate, and in the correct ratios of the gases as required by the steel mill. According to Gorin, the concept would work well where there are integrated mills, such as a blast furnace which produces low calorific value gas, as well as a mill using higher calorific value gas. “The concept of mixing gases using a thermo-compressor, and not an electrically-powered booster fan, is exclusive to Air Products.  We are very proud of this ground-breaking innovation,” says Rob Richardson, General Manager: On-Sites at Air Products South Africa.

“We are also proud of the fact that our first gas thermo-compressor station was commissioned on time, on budget and according to customer requirements.” “While this concept is new to the South African market, it will also be rolled out internationally, and has important implications in terms of energy efficiency and cost-savings,” Gorin maintains.  “This innovation provides a creative alternative to using electricity - which is becoming increasingly compelling for all users. Furthermore, it saves the customer money by not having to install a booster fan/compressor, which can cost up to ten times as much.” “The successful commissioning of the station is testament to Air Products South Africa’s ongoing commitment to finding innovative solutions for our customers when it comes to increased productivity and energy efficiency. The new station has succeeded in meeting the customer’s exact requirements, while at the same time providing meaningful cost benefits,” Richardson concludes.

Edited by Creamer Media Reporter

Comments

Latest Multimedia

Magazine video image
Magazine round up | 29 March 2024
Updated 20 minutes ago

Showroom

Multotec
Multotec

Multotec, recognised industry leaders in metallurgy and process engineering help mining houses across the world process minerals more efficiently,...

VISIT SHOWROOM 
SABAT
SABAT

From batteries for boats and jet skis, to batteries for cars and quad bikes, SABAT Batteries has positioned itself as the lifestyle battery of...

VISIT SHOWROOM 

Latest Multimedia

sponsored by

Option 1 (equivalent of R125 a month):

Receive a weekly copy of Creamer Media's Engineering News & Mining Weekly magazine
(print copy for those in South Africa and e-magazine for those outside of South Africa)
Receive daily email newsletters
Access to full search results
Access archive of magazine back copies
Access to Projects in Progress
Access to ONE Research Report of your choice in PDF format

Option 2 (equivalent of R375 a month):

All benefits from Option 1
PLUS
Access to Creamer Media's Research Channel Africa for ALL Research Reports, in PDF format, on various industrial and mining sectors including Electricity; Water; Energy Transition; Hydrogen; Roads, Rail and Ports; Coal; Gold; Platinum; Battery Metals; etc.

Already a subscriber?

Forgotten your password?

MAGAZINE & ONLINE

SUBSCRIBE

RESEARCH CHANNEL AFRICA

SUBSCRIBE

CORPORATE PACKAGES

CLICK FOR A QUOTATION







sq:0.106 0.163s - 158pq - 2rq
Subscribe Now